Successful load test of 2 TP cover racks
An urgent job for a good customer. Two TP cover racks designed and produced by SubC.
Installation of bunker lines on the loadout site
After the excavation for the bunker lines, the installation of the bunker lines was carried out.
New anchoring solution for H-beams
New JibFlex solution. Currently, we are working on a new standard anchoring solution for H-beam.
Glass Fibre Reinforced Epoxy
We are pleased to have recently been certified as Glass Fibre Reinforced Epoxy (GRE) specialists.
We conducted an ROV operation to determine if the jacket structure was damaged, especially horizontal braces. Without the use of divers or RAT.
Splash Zone Painting Campaign
A good working relationship ensured that the job was completed within the time frame despite the weather.
Chemical Injection Module, multidiscipline fabrication
Johan Sverdrup - SubC was awarded the full fabrication, assembly and testing contract.
Installation of Wellhead Access Deck
The installation was a demanding and challenging job, carried out using our special team of rope access technicians.
A new, flexible JibFlex solution for MacArtneys workshop
The advantage of this new solution is particularly the lifting height.
Flare Access Platform replacement in the Danish part of the North Sea
Due to thermal stress issues, the original platform was replaced.
New JibFlex solution - moving faulty motors on a wind vessel.
A 4 modules solution moving 1 ton with the flexibility of 1.2 metres.
See how easy the assembly and disassembly of the JibFlex is.
It took us roughly 5 minutes to assemble and disassemble the JibFlex.
Boat Fender for Tyra West E. Ready for 3D and coating.
31,2 tonnes Boat Fender for Tyra West E. A great welding job. Ready for 3D scan and coating.
The Spider Deck Clean-Up Campaign
The objective for solving the project was to perform the work in the splash zone without personnel.
Epoxy injection at the Culzean platforms in UK
To ensure a long lifetime for the caissons, it was decided to fill up the gaps to prevent fatigue in the caissons.
The Robotic Jacket Crawler - among top 10 finalists
Among the global top 10 finalists at the Total E&P Best Innovators awards. Read the story; from idea to product.
Diamond Wire Cutter performing circumferential cuts
The removal was done safely and controlled; one section at a time.
Grabber & Diamond Wire Cutter Light in operation
The Grabber & Diamond Wire Cutter Light is lowered from the topside of the platform to the splash zone.
Delivery of TP cover racks
A robust, revolving solution which makes it possible to stack the TP covers. Simple and smart.
Succesful delivery of 4 stairs
We just delivered 4 stairs to use on the tower grillage. Produced in our aluminium department in Esbjerg.
Testing the Cutter
We have just tested a new product called Cutter, which will be used on the Tyra East C for Total later this week.
EY Entrepreneur Of The Year 2019 - Norminee
SubC has been nominated for EY Entrepreneur Of The Year 2019.
JibFlex Train the Trainer Course
JibFlex Train the Trainer Course - going from knowing little to much in 3 days.
Weld & epoxy project
Ensuring a long lifetime. Uninstalling seals on one caisson is ongoing after successful epoxy injection.
Bearing Blocks Campaign
Fabrication and installation of 24 lifting points for Tyra. Responsible for the preparation including project management and engineering.
Gangway designed for extreme wind conditions
Design, Engineering, Fabrication and Installation of aluminium gangway designed for extreme wind conditions.